-40%
Pyrocat-HD in glycol, high acutance film developer (10 liters), Alt.photography
$ 7.44
- Description
- Size Guide
Description
Due to pandemic Postal services aredisrupted
and the shipping will be delayed.
Pyrocat-HD ( 2x100 ml )
for 10 liters working solution
Pyrocat-HD in glycol is a high acutance developer.
Solution A
( pg ) mixed in propylene-glycol stabilizes the formula to give a very long shelf life and long term consistency.
Solution B
Caution
If you spill a solution of Catechol, wash the area (or skin) with soap and water. Use tongs or rubber gloves whenever possible when working with this compound or its solutions.
Working Solution
To make a standard working solution mix 1 part A with 1 part B with 100 parts water (1:1:100)
DEVELOPMENT PROCEDURES
1. Pre-soak for five minutes. The pre-soak is optional with tray and tank development (except with minimal and stand development), but it is absolutely essential with rotary processing.
2. Development for the time required in tubes, drum, tray or tank according to the instructions that follow.
3. Stop bath. I recommend the use of a dilute acetic acid bath of about 1/4 to 1/2 normal strength. If the stop bath is too strong it will reduce image stain.
4. The use of an
alkaline
fixer is recommended (Kodak or Ilford rapid fix works just fine).
5. One minute in a hypo-clearing agent. I use a 1% solution of sodium sulfite.
6. Wash under running water for 30 minutes.
You can search for more info:
About developing times:
digitaltruth.com
---------------------------------------------------------------------------------------------------------------------------